China Specializing in The Production of Track Pulley Products, Smooth, Wear-Resistant, Easy to Push and Reduce Noise pulley puller

Item Description

One Bearing Trapezoid Gate Wheel

Design A B C D E Weight
(Y)
Units:g
Fat
(U)
Models:g
Fat
(V)
Models:g
30×11 35 eleven 30 forty five 17 * * 63
40×14 45 14 38 seventy five twenty five 192 185 194
50×15 fifty five 15 forty eight seventy five 25 253 244 263
50×15 sixty fifteen 48 eighty five 30 303 292 302
60×17 sixty five 20 fifty eight eighty five thirty four hundred 395 410
70×20 eighty twenty sixty eight a hundred 35 640 640 665
80×20 eighty five twenty forty eight one hundred 35 805 785 825
90×20 100 twenty 88 133 35 1130 1121 1145
100×20 a hundred and five twenty 98 133 35 1350 1338 1363
The information is measured by hand, maybe there are some problems, just for reference.

Double Bearing Gate Wheel

Product A B C D E Weight(Y) Excess weight(U)
50MM fifty five 26 forty eight 85 thirty 324 320
60MM sixty five 30 58 85 thirty 617 580
70MM 80 32 68 100 35 977 954
80MM 85 32 forty eight one hundred 35 1260 1223
90MM a hundred 32 88 133 35 1788 1760
100MM one hundred and five 32 98 133 35 2100 2078
The data is calculated by hand, possibly there are some mistakes, just for reference.

Laminated Gate Wheel

Model A B C D Fat(Y/V) Excess weight(U)
50mm 48 15 100 26 260 250
60mm 58 seventeen 100 26 390 360
70mm 68 twenty 136 33 590 570
80mm seventy eight twenty 136 33 750 725
90mm 88 20 152 33 1060 1030
100mm ninety eight 20 152 33 1265 1225
The information is measured by hand, probably there are some problems, just for reference.

Dangle Gate Wheel

 Model A B C D E F G H I
H25 fifty one 25 M9*fifty nine 95 seventy nine twenty five 6 27
H38 86 38 M12*70 11 a hundred and twenty 118 38 ten 32
H55 one hundred fifteen 55 M20*85 fourteen a hundred and forty 159 forty four ten fifteen
The info is measured by hand, maybe there are some problems, just for reference.

Triangle Gate Wheels/ Rotation Gate Wheels/ Hanging Wheels/ White Zinc Gate Wheels/ Doule Wheels Double Bearing Gate Wheel

      We have currently had nealy a decade producting and exporting knowledge. Considering that 2014, we have marketed our products to dozens of nations all around the entire world. And we have established a deep cooperative romantic relationship with several clients. 
      We make our merchandise with heart, attempt to bring the very best top quality for clients. So we acquired a lot of customer approval. After that, we will also strictly control, down-to-earth, and forge forward.

        1.ZheJiang Joinwin Components and Equipment Co., Ltd. we have ten several years production and exporting knowledge which ranks amongst the ideal in China. Largely sales pliers, spanners, scissors, saws, screwdrivers, wheels, sillicone sealant, tapline and other hand resources. 
        2.Positioned in HangZhou where is just 180km far from HangZhou Port and many uncooked substance factories around, significantly reduces transportation and procurement costs.
        3.We have skilled revenue and engineers to supply happy services to customers. Our company handles an area of 1000 sq. meters, has the most advanced generation tools and technology.      
        4.Customer initial, staff perform, embrace alter, sincere are our company lifestyle.      
        5.We aim to provide clients much more protection and hassle-free life.

              Pliers                 Adjustable Wrench  Mixture Spanners         Hammers               Pruner Scissors        Aviation Tin Snips
      Screwdrivers                    Padlocks                   Hand Saws                       Axe                 Silicone Sealant 
Q1: Can I get a sample?
A1: Sure, the samples are normally totally free for clients.

Q2: Can you provide OEM support?
A2: Yes, we can create the merchandise according to clients’ requires.

Q3: How can you assure the good quality?
A3: We have superior equipment and professional engineer and top quality inspector to make certain the high quality of the products. And we will send out additional items for insurance policies. Apart from, we have content after-service.

Q4: What is the MOQ?
A4: 500 PCS.

Q5: How prolonged you will finish my get?
A5: Completely in thirty days. (The particular circumstance relies upon on the manufacturing timetable of the manufacturing office.)

US $0.3-1.2
/ Piece
|
500 Pieces

(Min. Order)

###

After-sales Service: 5 Years
Warranty: 3 Years
Certification: CE
Splittable: Splittable
Surface Treatment: Zinc Plated
Material: Metal

###

Samples:
US$ 0.01/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model A B C D E Weight
(Y)
Units:g
Weight
(U)
Units:g
Weight
(V)
Units:g
30×11 35 11 30 45 17 * * 63
40×14 45 14 38 75 25 192 185 194
50×15 55 15 48 75 25 253 244 263
50×15 60 15 48 85 30 303 292 302
60×17 65 20 58 85 30 400 395 410
70×20 80 20 68 100 35 640 640 665
80×20 85 20 48 100 35 805 785 825
90×20 100 20 88 133 35 1130 1121 1145
100×20 105 20 98 133 35 1350 1338 1363
The data is measured by hand, maybe there are some errors, just for reference.

###

Model A B C D E Weight(Y) Weight(U)
50MM 55 26 48 85 30 324 320
60MM 65 30 58 85 30 617 580
70MM 80 32 68 100 35 977 954
80MM 85 32 48 100 35 1260 1223
90MM 100 32 88 133 35 1788 1760
100MM 105 32 98 133 35 2100 2078
The data is measured by hand, maybe there are some errors, just for reference.

###

Model A B C D Weight(Y/V) Weight(U)
50mm 48 15 100 26 260 250
60mm 58 17 100 26 390 360
70mm 68 20 136 33 590 570
80mm 78 20 136 33 750 725
90mm 88 20 152 33 1060 1030
100mm 98 20 152 33 1265 1225
The data is measured by hand, maybe there are some errors, just for reference.

###

 Model A B C D E F G H I
H25 51 25 M9*50 9 95 79 25 6 27
H38 86 38 M12*70 11 120 118 38 10 32
H55 115 55 M20*85 14 140 159 44 10 15
The data is measured by hand, maybe there are some errors, just for reference.
US $0.3-1.2
/ Piece
|
500 Pieces

(Min. Order)

###

After-sales Service: 5 Years
Warranty: 3 Years
Certification: CE
Splittable: Splittable
Surface Treatment: Zinc Plated
Material: Metal

###

Samples:
US$ 0.01/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model A B C D E Weight
(Y)
Units:g
Weight
(U)
Units:g
Weight
(V)
Units:g
30×11 35 11 30 45 17 * * 63
40×14 45 14 38 75 25 192 185 194
50×15 55 15 48 75 25 253 244 263
50×15 60 15 48 85 30 303 292 302
60×17 65 20 58 85 30 400 395 410
70×20 80 20 68 100 35 640 640 665
80×20 85 20 48 100 35 805 785 825
90×20 100 20 88 133 35 1130 1121 1145
100×20 105 20 98 133 35 1350 1338 1363
The data is measured by hand, maybe there are some errors, just for reference.

###

Model A B C D E Weight(Y) Weight(U)
50MM 55 26 48 85 30 324 320
60MM 65 30 58 85 30 617 580
70MM 80 32 68 100 35 977 954
80MM 85 32 48 100 35 1260 1223
90MM 100 32 88 133 35 1788 1760
100MM 105 32 98 133 35 2100 2078
The data is measured by hand, maybe there are some errors, just for reference.

###

Model A B C D Weight(Y/V) Weight(U)
50mm 48 15 100 26 260 250
60mm 58 17 100 26 390 360
70mm 68 20 136 33 590 570
80mm 78 20 136 33 750 725
90mm 88 20 152 33 1060 1030
100mm 98 20 152 33 1265 1225
The data is measured by hand, maybe there are some errors, just for reference.

###

 Model A B C D E F G H I
H25 51 25 M9*50 9 95 79 25 6 27
H38 86 38 M12*70 11 120 118 38 10 32
H55 115 55 M20*85 14 140 159 44 10 15
The data is measured by hand, maybe there are some errors, just for reference.

What is a pulley?

Pulleys are shafts or wheels on a shaft that support the movement and change of direction of a taut cable. The pulley also transfers power from the shaft to the cable. A simple pulley is used to raise the school flag. Read on to learn about the basic types of pulleys. We also covered the use of pulleys in everyday life. Read on to learn more about this important mechanical part.
pulley

composite pulley

A composite pulley is a mechanical system where two or more pulleys and ropes are connected together. It reduces the force required to lift the load because the force is divided by the distance of each pulley. Distance is equal to the mass of the object. Composite pulleys are a common mechanical system on sailboats. Composite pulleys can be used to lift heavy equipment such as sails.
The compound pulley unit consists of two pulleys, one fixed and the other movable. The fixed pulley is fixed overhead, while the movable pulley is connected to the load by a chain. The lift applies force to the other end of the rope. Anchor points are attached to fixed joists, ceiling joists or sturdy branches. The chain should be long enough to support the load during lifting.
Composite pulleys can be made from a variety of materials. Some are fixed and remain fixed. Others are detachable. The composite pulley combines the advantages of both types, making it a versatile tool. In the table below, these three types of pulleys are compared. It’s easy to see which one is best for your needs. The right choice depends on your specific needs and budget.
The compound pulley system consists of two fixed pulleys and one movable pulley. The compound pulley system multiplies the force by a factor of 2. The compound pulley system is particularly suitable for heavy loads and is ideal for construction sites. Workers apply less than half the load force on the composite pulley, significantly reducing the force required. This is a major benefit for many people.

Fixed pulley

Fixed pulleys are fixed gears of fixed length that are mounted on solid objects. There are many different types of pulley systems. Some cooperate with each other, but not “fixed”.
Fixed pulleys can be used for a variety of purposes. One application is to lift small objects. They have a one-to-one mechanical advantage. Often, a single pulley can lift small loads. The force required to lift a single fixed pulley remains the same. They are usually used to lift lighter objects. They can even be attached to buckets used to draw water from wells.
While single fixed pulleys have desirable mechanical advantages, they are not suitable for force multipliers. Because their mechanical advantage diminishes over time, they are not effective force multipliers. They are used to redirect work so that it can be applied in the most convenient direction. This mechanical advantage is the main advantage of fixed pulleys and the most common way of moving objects. They have several benefits, including the ability to increase the speed of moving objects.
Another application for fixed pulleys is lifting supplies. A scaffold can weigh more than one and can be directly hoisted. In order to facilitate the transportation of materials, fixed pulleys are usually installed on the top of the scaffolding on construction sites. Then thread the rope through the edge of the groove that holds the pulley. The fixed pulley exerts the same force on the pull side as on the push side. The same is true for moving objects with fixed pulleys.
pulley

moving pulley

A movable pulley is a device whose part is fixed to another object, usually a rod or beam. The movable part moves with the load, making the load feel lighter. This is a useful tool for those who need to carry heavy items such as large bags. The advantages of moving pulleys are many. Here are some of them. Read on to learn more about them.
One of the most common uses of movable pulley systems is climbing high objects. Climbers act as pulley loads and pull ropes to lift objects. Eventually, when the traction stops, the climber descends. However, it is still a useful tool in other situations. The movable pulley system can help you climb the tallest objects or lift them to level surfaces.
Another example of movable pulleys is in industry. Depending on the load, movable pulleys make handling and moving loads easier. You can use them in a variety of applications in manufacturing and industry, including cleaning. For example, the American flag is raised and lowered every day. Removable pulleys are a handy tool when buildings need cleaning.
If you’re not sure whether a task requires a pulley, a zipline might be a good option. Connect the two ends of the rope and the pulley will move along the rope, then attach the rope to the metal cable. The load is the person holding the pulley, and the force comes from the attachment on the other end of the rope. There are two types of live pulleys: simple pulleys with just one wheel and live pulleys with many ropes attached.

School flag raised with simple pulleys

How is the school flag raised? It is pulled up by a rope attached to a pulley at the top of the pole. When the rope is pulled, the pulley turns, raising the flag. A pulley is a simple mechanism that helps people move heavier objects with ease. The rope must be securely attached to the pulley to keep the flag stable.
A simple pulley is a spinning wheel with grooves on one side and ropes on the other. The rope can be any length and the wheels can be any size. The rope has to go through the groove and the load is attached to the other end of the rope. Simple pulleys are pulleys with fixed shafts. An example is the wheel on a school flagpole.
A simple pulley system consists of a primary pole, a secondary pole and an outer member. The primary flagpole is connected to the track by a detour, while the secondary flagpole is connected to the track by a pipe. There is a groove on one side of the track, which passes through the inner cavity of the flagpole. An open track at the upper end of the track connects the two parts of the pulley.
A simple pulley can be used for many purposes. This is a useful machine that can be used to raise the flag. Among other things, it can be used in clothing lines, bird feeders, and even roofers. And, of course, you can use the pulley to raise the flag. Its versatility makes it an essential part of school decor.
pulley

cast iron pulley

If you are looking for pulleys for your machine, you may come across cast iron pulleys. They are usually cheap and available in a variety of sizes. The rim is held in place by a mesh attached to a central boss. The arms and spokes can be straight or curved, but most are oval. There are many uses for this type of pulley.
You might wonder why the arms of cast iron pulleys are so curved. Bent arms tend to yield rather than break. Cast iron pulleys are usually round with a slight bump on the rim, which helps keep the belt centered on the rim as it moves. On a 300mm diameter pulley, the bumps may be as small as 9mm.

China Specializing in The Production of Track Pulley Products, Smooth, Wear-Resistant, Easy to Push and Reduce Noise     pulley puller		China Specializing in The Production of Track Pulley Products, Smooth, Wear-Resistant, Easy to Push and Reduce Noise     pulley puller
editor by czh 2022-12-28

variable pulley

As one of leading variable pulley manufacturers, suppliers and exporters of products, We offer variable pulley and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of variable pulley

Recent Posts