in spite ofHot rolled pulleyIt is mainly used in high-strength heavy equipment, but in daily maintenance, good maintenance work is still needed to ensure the stability of its performance and the integrity of its physical state.pulleyIt is a labor-saving equipment commonly used in daily life. It is used in many fields. Pay attention to the following requirements in the daily maintenance process:
1. Pay attention to cleaning the track after each use of the hot-rolled pulley. Because in use, the steel wire rope is often coated with low-temperature lubricant, which will inevitably stick to the track surface of the hot-rolled pulley during work, so it is necessary to maintain it. Remove grease and keep the track surface clean.In addition, correct the correct position of the sheave and drive shaft, and add lubricating oil to the bearing and other moving parts.
2. The track cleaning of the hot-rolled pulley needs to be cleaned with a neutral detergent. After cleaning, repair the painted part to ensure that the surface of the pulley is completely covered by paint to prevent oxidation.
3. In addition, it is necessary to regularly check whether there is rust or burrs on the steel wire. If it does, it needs to be treated in time, otherwise it will cause serious wear on the hot rolled pulley.Check whether some fixed parts are loose and whether the sealing parts are worn out. This is the specific content of regular inspections.
Therefore, in the process of daily maintenance of hot-rolled pulley products, as long as more careful inspection and work, and timely treatment of abnormal parts can ensure the normal operation of hot-rolled pulleys, and at the same time, it can also avoid mechanical problems during work. Production problems caused by component failures.