We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 diverse branches. For far more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Head Sheave/ Sheave Pulley/Lifting Tools Xihu (We EPT Lake) Dis. Wheel Device
Introduction:
Mine hoist can be divided into two kinds a single sort is JKE sequence solitary rope mining hoi EPT and the EPT is Multi-rope friction hoist.
This collection mine hoi EPT like 2m-5m single tubular and double tubular sorts, and can be utilised for mining hoist, personnel lifting and material and tools descending from vertical shafts or inclined shafts of coal, metallic and nonmetal ores.
JK mine hoist is mainly used in inclined roadways and wells of coal mines, metal mines and non-metal mines to hoist or lower personnel and materials.
Complex parameters:
| Model | Drum | Tension PF |
Tension Differe |
Rope Diameter |
Lift height (m) | Max Velocity |
Reduce velocity ratio |
Motor Pace |
||||||
| Number | Dia | Width | 1-layer | 2-layer | 3-layer |
|||||||||
| m | KN | mm | m | m/s | r/min | |||||||||
| JK-2×1.5/twenty | 1 | 2. | 1.5 | 62 | 24 | 305 | 650 | 1571 | 5.2 | twenty. | 1000 | |||
| JK-2×1.5/31.5 | 31.five | |||||||||||||
| JK-2×1.8/20 | 1.80 | 375 | 797 | 1246 | 20. | |||||||||
| JK-2×1.8/31.five | 31.five | |||||||||||||
| JK-2.5×2/twenty | 2.five | 2.00 | 83 | 28 | 448 | 945 | 1475 | 5. | twenty. | 750 | ||||
| JK-2.5×2/31.5 | 31.five | |||||||||||||
| JK-2.5×2.3/20 | 2.thirty | 525 | 1100 | 1712 | 20. | |||||||||
| JK-2.5×2.3/31.5 | 31.5 | |||||||||||||
| JK-3×2.2/20 | 3. | 2.20 | 135 | 36 | 458 | 966 | 1513 | 6. | twenty. | |||||
| 2JK-2×1/eleven.two | 2 | 2. | 1.00 | 62 | 40 | 24 | 182 | 406 | 652 | 7. | 11.two | |||
| 2JK-2×1/twenty | 20. | |||||||||||||
| 2JK-2×1/31.five | 31.five | |||||||||||||
| 2JK-2×1.twenty five/eleven.two | 1.25 | 242 | 528 | 838 | 11.two | |||||||||
| 2JK-2×1.twenty five/20 | twenty. | |||||||||||||
| 2JK-2×1.twenty five/31.5 | 31.five | |||||||||||||
| 2JK-2.5×1.2/eleven.two | 2.five | 1.20 | 83 | 65 | 28 | 843 | 8.eight | 11.two | ||||||
| 2JK-2.5×1.2/twenty | 20. | |||||||||||||
| 2JK-2.5×1.2/31.5 | 31.5 | |||||||||||||
| 2JK-2.5×1.5/11.2 | 2.5 | 1.50 | 83 | 65 | 28 | 319 | 685 | 1080 | 8.eight | eleven.2 | ||||
| 2JK-2.5×1.5/20 | twenty. | |||||||||||||
| 2JK-2.5×1.5/31.5 | 31.5 | |||||||||||||
| 2JK-3×1.5/eleven.2 | 3. | 135 | 90 | 36 | 289 | 624 | 994 | 10.5 | 11.two | |||||
| 2JK-3×1.5/twenty | twenty. | |||||||||||||
| 2JK-3×1.5/31.5 | 31.5 | |||||||||||||
| 2JK-3×1.8/eleven.two | 1.80 | 362 | 770 | 1217 | eleven.2 | |||||||||
| 2JK-3×1.8/20 | 20. | |||||||||||||
| 2JK-3×1.8/31.5 | 31.five | |||||||||||||
| 2JK-3.5×1.7/eleven.two | 3.five | 1.70 | 170 | 115 | 40 | 349 | 746 | – | 12.6 | 11.2 | ||||
| 2JK-3.5×1.7/twenty | twenty. | |||||||||||||
| 2JK-3.5×2.1/eleven.two | 2.ten | 450 | 950 | – | eleven.two | |||||||||
| 2JK-3.5×2.1/11.2 | twenty. | |||||||||||||
| 2JK-4×2.1/10 | 4. | 245 | 160 | 48 | 421 | 891 | – | 12.6 | ten. | 600 | ||||
| 2JK-4×2.1/eleven.2 | eleven.2 | |||||||||||||
| 2JK-4×2.1/20 | 20. | |||||||||||||
| 2JK-5×2.3/ten | 5. | 2.30 | 280 | 180 | 52 | 533 | – | – | 12 | ten. | 500 | |||
| 2JK-5×2.3/eleven.two | ||||||||||||||
Possible defects:
| Defect | Triggers |
| Unfilled sections | Insufficient material Low pouring temperature |
| Porosity | Melt temperature is too high Non-uniform cooling rate Sand has low permeability |
| Hot tearing | Non-uniform cooling rate |
| Surface projections | Erosion of sand mold interior A crack in the sand mold Mold halves shift |
FAQ
Q: How about the top quality of your goods?
A: Our machines are produced strictly in accordance to nationwide and global expectations, and we take a te EPT on every single products just before supply.
Q: How about the price tag?
A: We are manufactory, and we can give you reduced cost than people trade organizations. Aside from, clients from Created in China can get a price cut.
Q: Do you provide following-sale service?
A: Indeed. The warranty period of our machines is 1 12 months, and we have a expert right after-sale crew to promptly and extensively solve your issues.
Q: Do you give equipment operation training?
A: Of course. We can send specialist engineers to the functioning website for tools set up, adjustment, and operation coaching. All of our engineers have passports.
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 various branches. For far more information: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of authentic gear manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our organization and the shown substitution components contained herein are not sponsored, accepted, or created by the OEM.
